Advance Techo

 The “ADVANCE TECHO”Indentation Hardness Tester for polyurethane foam consists of a circular indentor which can be pressed against the foam block under test, a motorized arrangement to move the indentor, and a load indicating arrangement to indicate the load being exerted by the indentor on the foam block at any instant.

The indentor is in shape of a circular disc and is mounted on a self-aligning ball bearing to ensure that it sits parallel to the surface of the test specimen. It is mounted at the lower end of a screw, which can be raised or lowered at a specified speed with the help of a motor and worm reduction gearbox. An arrangement to stop the motor at extreme ends of travel of the indentor is provided.

The downwards movement of the indentor is measured with the help of a pre-set type digital displacement meter, which can be set at any desired value to stop the motor automatically at a desired displacement. A linear scale is provided to indicate the gap between the bottom face of the indentor and the loading platform. The indentor can also be moved by hand to apply the initial load.

The load platform is made of cast aluminium and has a large number of holes arranged in a grid for rapid escape of air during compression. It is mounted on shear beam type load cell. A digital load indicator is provided to indicate the load acting on the test specimen.

The equipment is finished in blue metallic painting and bright chrome / zinc plating to give it a corrosion resistant finish.

TECHNICAL DATA 

Area of Indenter: 323 cm²

Diameter of Indenter: 202.8 mm

Maximum Thickness of test

Specimen that can be tested: 150 mm

Measurement of load: 0 – 100 kg x 0.1 kg

Measurement of travel: 0 – 150 x 1 mm

Speed of movement of Indenter      : 150 mm/min

Motor: ¼ HP, Single Phase, 230V AC

New Weight: 115 kg (approx.)

Packed Dimension in Inch: 26 × 18 × 38

Gross Weight: 165 kg (approx)

RELATED STANDARD 

IS: 7888 – 1976: Methods of Test for Flexible Polyurethane Foam

Additional Information:

• Item Code: 007
• Production Capacity: 50
• Delivery Time: 07days
• Packaging Details: wooden

With our in-depth knowledge of this domain, we are actively engaged in providing an excellent quality range of Universal Testing Machine.

Tensile, compression, shear strength, bending strength and elongation are the prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.       

                The “Advance ” Universal Testing Machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.

                The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.

                The variable speed model speed is very by a knob fixed on the panel and the speed also digitally indicated on the control panel. Different model have speeds suitable for testing different materials.

                The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.

                The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical, which include micro-switches, Push buttons, and contactors for safe and convenient operation

Backed with huge industry experience and market understanding, we are involved in providing a wide variety of Box Compression Tester for our valued patrons.

With our vast experience & knowledge in this field, we are engaged in providing a quality-assured range of Drop Tester. 

Essential for quality control and development for consumers of corrugated and solid fibreboard,shipping containers, etc. Ascertains transportworthiness of the container.

OPERATION:

A box attached to a vertical column is provided with mechanism to release the resting table instantaneously. For easy adjustment of the drop heights this box is balanced by a counter-weight over a pulley. Package under test is placed on the resting table. By pressing the lever on the box, the package is allowed to fall on the platform at the bottom. The fall is straight and perfectly vertical. The machine is sturdy and easy to operate.

SALIENT FEATURES:

·                  A precise and reliable machine

·                  Sturdy in construction

·                  Precisely machined to International Standards

·                  Fitted with angular drop arrangement —

              for checking transport-worthiness from all angles

·                  Costs less than half of the similar imported

              tester — saves valuable foreign exchange too.

·                  Facility for corner drop

Additional Information:

• Item Code: AT023
• Production Capacity: 100
• Delivery Time: 15Days
• Packaging Details: wooden

T

                The “Advance” TENSILE Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gear box and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. There is a socket in the indicator which is connected to the PC.  The load directly indicated in kilograms or Newton.

                We provide the Window based software which gives the different measurement parameter and the graph between load vs elongation. The report can be printout by using proper printer.

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.

                The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer. Different model have speeds suitable for testing different materials.

                Various built in safety arrangements such as over travel protection, Are provided.

                The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied with electrical which include micro-switches, Push buttons and contactors for safe and convenient operation.

Additional Information:

• Item Code: 12
• Production Capacity: 100
• Delivery Time: 7 DAYS
• Packaging Details: WOODEN

               The Limited Oxygen Index Apparatus consist of a test chimney made of borosilicate glass (size is 100mm internal diameter & 500mm long) suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with thermocouple for the measurement and control the temperature within the chimney. A copper tube with suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer is also mount in the instrument.
               Two ROTAMETER with needle valve are provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform

FLOW METER (ROTAMETER):   
·        10 to 90 cc/sec for Oxygen × 2cc/sec
·        30 to 270 cc/sec for Nitrogen × 10cc/sec

Additional Information:

• Item Code: q2
• Production Capacity: 100
• Delivery Time: 12Days
• Packaging Details: Wooden Box

With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high qualityMartindale Abrasion Tester.

Being a customer oriented organization, we are highly engaged in providing a wide range of Ross Flex Tester.

We are ranked amongst the renowned organizations that are engaged in providing the best quality range of Folding Endurance Tester.

Keeping in mind ever-evolving requirements of our respected clients, we are providing a premium quality range of Hardness Testing Machine.

In order to cater the variegated demands of our precious clients, we are offering a wide range of Air Permeability Tester.

Backed by rich industry experiences; we are highly engaged in offering a premium quality range of Coefficient of Friction Tester.

Additional Information:

• Item Code: 004
• Production Capacity: 100
• Delivery Time: Ready to stock
• Packaging Details: wooden/ poly

• For charpy tests for various materials.

• Works on Pendulum Principle, Difference between height of drop of Pendulum before Rupture & Height of rise after Rupture of specimen is directly proportional to Impact energy absorbed.

• Direct indication of impact energy absorbed by specimen on large dial and on Digital Display

• Safety guard for the Pendulum. 

Additional Information:

• Item Code: 0121
• Production Capacity: 100
• Delivery Time: 07days
• Packaging Details: wooden /plastic

We are successfully engaged in providing a wide gamut of Demattia Flexing Fatigue Tester.

The ability of light leathers such as those used in shoe uppers, gloves and garments to with stand repeated flexing without cracking is determined with the help of a flexometer. In this test, the test specimens in the shape of rectangular pieces are folded and clamped at each end to maintain them in a folded position in a set of grips, one of which is fixed while the other is able to oscillate. The movement of the oscillating grip causes the fold in the test specimen to run along its fold. This operation is carried out repeatedly and the test specimens inspected periodically to Asses the damaged produced.

The Advance Techo Flexometer is built on a rigid metallic base plate. The test specimen is held between a pair of stationary and oscillating grips. The grips are specially designed to enable quick fixing and removal of test specimen and are shaped to meet the specification.

The motion of the oscillating grips is given through a link mechanism, which oscillates the shaft carrying the grips. All the pivot points of the apparatus have ball bearing to ensure the long life and smooth operation.

The driving force to the link mechanism is given through a ¼ hp single-phase motor and two sets of V-pulleys. A six digit even electronic counter with key reset and backup memory is provided to count the total number of flexing cycles undergone by the test specimens.

The apparatus is finished in bright chrome/ zinc plating and NC based painting to give it a corrosion resistance finish

Specimens cutting die and cutting press are also available as operational accessories.

Flexing frequency                                                           100± 5 cycles/ minute

Angle of oscillation of grips                                        22.5 ±0.5°

Dimension of test specimens                                    70 X 45 mm

Maximum number of test specimens

Tested simultaneously                                                 6, 12, 24

• UIC code 564-2 OR: appendix15: Test method for determining deterioration of visibility due to smoke released on combustion of materials.

For determining the corrosion of surface coating when exposed to a salt environment. Test can be carried out the samples by spraying salt solution into the chamber. The corrosion rates are expressed as weight loss withtime.

• PID digital temperature indicator cum controller
• Digital timer with memory backup
• Heater with sensor
• Atomizing nozzles
• Fog collection device
• Hanging arrangement withtray as per standard

Safety feature water level sensor & thermostat with indicator and buzzer

Capacity                                                                                : 1600gm/3200gm/6400gm

Scale Reading                                                                       : 0 To 100% of range

 The instruments is finished is metallic painting and bright chrome plating to give it a corrosion resistant finish

Pilling Tester, mounting the test specimens onto the PU tubes and put them into the pilling box which has cork liner mounted on the 6 sides, rotating at a specified speed and direction, simulates the normal wear of fabrics. When specified counter has been finished, compare the tested specimens with reference photographs for assessment of pilling

Additional Information:

• Item Code: 456
• Production Capacity: 900
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX

In order to meet various demands of our esteemed clients, we are engaged in providing an optimum quality array of Electric Tensile Testing Machine.

We are a reputed entity, engaged in offering a qualitative array of Elmendorf Tear Tester.

Being a leading firm in this industry, we are offering a high quality range of Din Abrasion Tester.

Additional Information:

• Item Code: 001
• Production Capacity: 10
• Delivery Time: Ready to stock

Additional Information:

• Production Capacity: 50
• Delivery Time: 10 day

We are among the reputed organizations, highly engaged in providing an optimum quality range of Cobb Tester.

The resistance to water penetration is determined by the quantity of water absorbed by a paper or a board when one of its faces is placed in contact with this liquid, under the conditions.

The “Advance ” Cobb Tester consists of a brass (or gun metal) cylinder of known inside diameter and length. It has a metallic plate, which is used for clamping the one side of the cylinder with the help of bracket and bolts. The metallic plate, which is used for clamping purpose, is paste a paper sheet for the perfect clamping. The whole assembly of the cylinder and clamping arrangement is pivoted so that easy and fast pour off the water takes place. A brass roller of specified size and shape is also provided with the instrument.

The equipment is designed to give a long and trouble free life; the components are bright polished and bright chrome platted.

TECHNICAL DATA

Inside area of cross section of the cylinder         : 100 sq cm.

Length of the cylinder                                                  : about 5 cm

Weight of the roller                                                       : 10 ± 0.1 kg

Diameter of the roller                                                   : 100 ± 1 mm

Length of the roller                                                        : 200 mm

RELATED STANDARD

IS: 1060(part 1) – 1966: Methods of sampling and test for paper and allied products: part 1

Additional Information:

• Item Code: ATCT
• Production Capacity: 15
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX

Additional Information:

• Item Code: 006
• Production Capacity: 50
• Delivery Time: 10 days
• Packaging Details: wooden