Ghaziabad, Uttar Pradesh
GST No. 09ABLFA3110D1ZY
Call 08046073995 84% Response Rate
Minimum Order Quantity: 01 Piece
Usage/Application | Industrial |
Display Type | Large Color Graphic Display |
Model Name/Number | AT/UTM |
Capacity | 2500kg |
Size | 80/45/32 |
Material | Mild Steel |
Automation Grade | Automatic |
Phase | single phase |
Accuracy | 01 |
Power | 220volt |
Additional Information:
View Complete details
Usage/Application | Laboratory |
Capacity | 10ton |
Material | Mild Steel |
Display Type | Digital |
Tensile, compression, shear strength, bending strength and elongation are the prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
The “Advance ” Universal Testing Machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.
The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.
The variable speed model speed is very by a knob fixed on the panel and the speed also digitally indicated on the control panel. Different model have speeds suitable for testing different materials.
TECHNICAL DETAIL
· Range : 10000 kg (10 ton)
· Least Count : 1 kg (0.001 ton)
· Speed : Variable 1 to 10mm/min
· Traverse : 25mm to 900mm.
· Motor : 2 Hp, 1425 rpm, Induction motor
· Power : 220VAC, 50HZ, 2000 W, Three phase
View Complete details
Minimum Order Quantity: 1 Unit
Machine Type | Digital cum computerized |
Model Name/Number | 10 |
Automation Grade | Semi-Automatic |
Machine Weight | 200 kg |
Power | ac |
Brand | Advance Techo |
Weight | 500kg |
Speed | variable |
Measuring Range | 1 ton |
Ram Stroke | 750mm |
Display Type | digital |
Capacity | 1 ton |
Load Resolution | 1 percent |
· Range : 2000 kg (2 ton)
· Least Count : 0.2 kg (0.0002 ton)
· Speed : Variable 50 to 500mm/min
· Traverse : 25mm to 900mm.
· Motor : 2 Hp, 1425 rpm, Induction motor
· Power : 220VAC, 50HZ, 2000 W, Three phase
Additional Information:
View Complete details
Product Type | Impact Testing Machine |
Automation Grade | Automatic |
Capacity | 50 kg. |
Brand | AdvanceTecho |
Voltage | 220 |
Frequency | AC |
Material | Mild steel And aluminum and Stainlesssteel |
Display Type | Digital |
Phase | Single |
Weight | 200 kh. |
Power | 220 |
Izod Strike | Vertically |
Warranty | 2 year |
I Deal In | New Only |
View Complete details
Tensile and elongation are the prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
The “Advance Techo” Universal Testing Machine provide a relatively inexpensive way for determining the Tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator and also indicated with graph on the monitor of the computer. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.
We will provide the Window based software which give the different measurement parameter and the graph between load vs displacement, load vs elongation or stress vs strain. The software have facility to store the data in memory and have the facility to indicate the break load, yield load elongation at break load and yield load the software have the facility to automatically calculate the yield, tensile strength and compression strength The report can be printout by using proper printer.
The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.
Various built in safety arrangements such as over travel protection, are provided.
The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical. Which include micro-switches. Push buttons, and contactors for safe and convenient operation.
A variety of grips suitable for holding different materials are offered as optional accessories.
View Complete details