Advance Techo

The “Advance Techo” Air Permeability Tester for textiles consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen.

 

The test specimen is hold between two round-shaped grips. The grips are lined with rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism.

 

The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the digital manometer (or manometer tube) in terms of mm of water level & airflow is measured by the Rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

Additional Information:

• Item Code: 002
• Production Capacity: 1200
• Delivery Time: 7 Days
• Packaging Details: As per coustmer and woden

ELMENDORF TEARING STRENGTH TESTER RANGE: 1600 GM Optional Accessories : Augmenting weight for 3200 gm capacity Augmenting weight for 6400 gm capacity Make :Advance Techo Model No. : ATE/ETST/2 With Operating Manual (English) Instrument Size in Inch :15” × 15” × 17” (L × W × H) Instrument Weight : 40 KG (approx)

The AT  Heat Deflection Temperature Tester consists of a specimen support, an immersion bath, a set of weights under deflection –measuring device. this instrument is mostly used in deflection test of plastic under load and temperature.

Additional Information:

• Item Code: hdt

De-Mattia Flex Tester has a set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action. The set of grip has two-fixed grip and one large reciprocating grip positioned between them in order to flex half of the test specimen while the other half is being unflexed. The reciprocating grip is slide on hardened and ground rods made of high carbon steel. The reciprocating motion is provided by an eccentric and linkage mechanism driven by an electric motor through V-belt and pulleys. A six digit electronic counter is provided for indicating the number of the test cycles undergone.

 

                 The equipment is build on a rigid fabricated base plate and finished in metallic painting and bright chrome/zinc plating to give it a corrosion resistant finish. Moulding dies for preparing test specimen, and jig and punch assembly for making initial crack in test specimen for crack growth test are available as optional accessories.

 

TECHNICAL DATA

 

Number of test specimens tested          :   Six (or Twelve)

Maximum opening between grips         :   75mm (adjustable)

Travel of reciprocating grip                    :   57.15mm (adjustable)

Flexing frequency                                     :  300cpm

Motor                                                           :  ¼HP single phase 230 V AC

Additional Information:

• Item Code: ATSDM
• Production Capacity: 100
• Delivery Time: 7 days
• Packaging Details: wooden ya poly peaking