Advance Techo

Box compression test The  Box Compression Tester made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator.

 

The instrument is made in two parts, one is for main instrument and the other is the control panel.

 

The ultimate test is to determining overall quality and performance of the container.

 

The instrument is bright chrome plating, zinc plating, painted in metallic paints.

 

 

 

 

 

Accuracy                      :       ±0.1% on full-scale

Speed                            :       Variable speed from 10 to 100 mm/min.

Gearbox                       :       Worm reduction gearbox.

Power Supply            :       440VAC, 50Hz, 3Ph.AC

 

Loading indication   :       Digital type with the following facility

1.     Peak Hold

2.     Kg and N readout

3.     Soft key pad

4.     Calibration through software i.e., keys only,

5.     10000 counts (i.e., 0.1 kg least count on 1000 kg load cell) (singed integer)

6.     Allow dual channel Encoder inputs to measure elongation

 

 

 

 

IS                        : 7028 (Part VI) - 1987, IS: 7028 (Part IX) - 1987

TAPPI              : T 804 om-02

ASTM               : D 4577 – 94/D 642 – 98