Advance Techo

The “Advance” Air Permeability Tester for textiles consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen.

TECHNICAL DATA

• Test Area : 4 cm2 and 10 cm2
• Rota meter : 6.0 –60 LPH at NTP
• (Accuracy 3% of FSR) 90 –900 LPH at NTP
• 300 –3000 LPH at NTP
• Vacuum gauge : 0 to 24 mm X 0.1 mm of water column.
• (Inclined tube type for analogue model)
• (Digital with vacuum sensor type for digital model)
• Power Required : 220 VAC, 50, Single phase
• (Other power options are also available on request)

Additional Information:

• Item Code: ATAPT
• Production Capacity: 112
• Delivery Time: 07days
• Packaging Details: Wooden / Plastic ETC.

Single Yarn Strength Tester is use to measure the tensile strength and elongation which are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

Additional Information:

• Item Code: AT-TTM
• Production Capacity: 100
• Delivery Time: READY STOCK
• Packaging Details: WOODEN / PLASTIC ETC.

FLOW METEFLOW METER (ROTAMETER): 

10 to 90 cc/ sec for Oxygen × 2cc/ sec

30 to 270 cc/ sec for Nitrogen × 10cc/ sec

NOTE:

Item Required By The User For Complete Testing:

 Oxygen gas, nitrogen gas and LPG cylinders with

its regulator and fitting, 220 V single phase power

 supply (Other Power optional).     R (ROTAMETER):

10 to 90 cc/ sec for Oxygen × 2cc/ sec  0 to 270 cc/ sec for Nitrogen × 10cc/ sec NOTE: Item Required By The User For Complete Testing: Oxygen gas, nitrogen gas and LPG cylinders with its regulator and fitting, 220 V single phase power supply (Other Power optional). RELATED STANDARDASTM D-2863-1997: Measuring the minimum oxygen concentration to support the candle like combustion of plastic (oxygen index)

Additional Information:

• Item Code: 09
• Production Capacity: 100
• Delivery Time: 10days
• Packaging Details: wooden box

Break load tester for lipstick according to As per IS9875 this machine is digital motorized model